Mark
New Member
Posts: 24
|
Post by Mark on Mar 15, 2005 14:42:23 GMT -8
Well I finely have my kart back together. I will head up to Amago on Friday for the engine run-in. I plan to be at Cajon on Sunday. I picked up a tech sheet at the last race and think that I am compliant with the exception of a safety on the front wheels. There is just a nyloc nut there now. I had a few conversations with Brian about what to expect at the race. There are a few things that I want to confirm...
Weights: 365lbs & 405 Fuel: pump or VP MS93 Tires: YGK with transition to YHC Oil: 32:1 Motul 800 is ok Gearing: 12/Not sure for this track Plug: Denso
Is there anything else I need to know about? I am sure that there is a ton of stuff that I am not smart enough to ask about at this point. As for Sunday, my goal is to start to learn the ropes and stay out of everyone’s way.
Mark
|
|
|
Post by Brian Felix on Mar 15, 2005 16:43:54 GMT -8
Mark, It sounds like you have it all under control. If the front end is an issue with Rob at Tech I will help you safety wire it. The only thing I can mention from looking at your list is the plug. You can use an NGK for much cheaper then a Denso. The Denso just works better at lower battery level. Look forward to seeing you Sunday!
|
|